What color options are available in elevator handrail pipes?

LiftKeys handrail systems offer 5 distinct color choices: Chrome, Smoked, Gold, Bronze, and ESB Black. Tubes and elbows can be matched in identical colors.

How to install handrails, is welding required?

No, welding is not required. Thanks to the special O-ring and setscrew system, tubes are fitted into elbows by rotating. This accelerates installation and prevents tube rotation.

What are the handrail tube diameter and wall thickness?

In our standard production, the tube diameter is 30 mm and wall thickness is 1 mm. The contact surface of wall mounting elbows is 42 mm in diameter.

Does it comply with EN 81-70 disability accessibility standard?

Yes, according to the EN 81-70 standard, the handrail gripping diameter must be between 30-45 mm. LiftKeys is fully compliant with its 30 mm diameter and 42 mm flange clearance.

Elevator Handrail Prices & Stainless Handrail Systems

Elbow Model

Vertical Saddle Joint

Lower Saddle Joint

Download Catalog

Elevator Handrails

Thanks to our innovative handrail solutions, you can produce in your factory with the freedom of size, color, and timing according to demand.

Measuring the installation width for elevator car handrails

How to Take Accurate Measurements?

Determine the dimensions of the area where the handrail will be installed
After finalizing the handrail length, take into account a total of 140 mm for the right and left elbows.

By deducting this dimension from the total handrail length, you can accurately calculate the pipe length to be used.

Handrail elbow cutting allowance calculation diagram

Elbow Allowance: 70 mm + 70 mm = 140 mm

Pipe Cutting Length: W (Width) - 140 mm

Elevator handrail pipe precision cutting process

You can cut your pipe to the correct size according to the calculations made by engineers.

O-rings are attached to the handrail elbows.
Placing two O-rings on each elbow prevents the pipe from moving back and forth.

Furthermore, when the pipe is mounted by rotating it into the elbow, the O-rings also prevent the pipe from rotating.
This system ensures the handrail operates in a fixed, safe, and stable manner.

Attaching O-rings to handrail elbows and installation details

Thanks to the handrails you can produce in your own factory at any time, you can completely eliminate material issues such as size mismatch, stock insufficiency, and scratches.

Box Contents

18 right elbows
18 left elbows
72 O-rings
36 setscrews (grub screws)
36 fixing bolts
36 fixing plates (mounting plates)

LiftKeys elevator handrail elbows box packaging

Contents per Box 36 Pieces

Box Dimensions and Weight Information

• Width 20 cm

• Length 29 cm

• Height 20 cm

• Weight 9 Kg.

TECHNIQUE MATRIX

Comparison of Stainless Elevator Handrail and Handle Models

Matrix of connection type, wall load distribution, ease of installation and compliance with the EN 81-70 disabled regulation.

Model/Connection Type	Pipe & Wall Thickness	Wall Flange Diameter	Mounting Technology	EN 81-70 Compliance
O-Ring Elbow Model	Ø30 mm / 1.0 mm (201 Stainless)	42 mm Wide Base	Weldless, Double O-Ring + Setskur	Fully Compatible
Vertical Saddle Model	Ø30 mm / 1.0 mm	38 mm Fixing	Pin Snap & Screw Lock	easygoing
Lower Saddle Model	Ø30 mm / 1.0 mm	38 mm Fixing	Bottom Connection Screw System	easygoing
Traditional Welded Handrail	Ø25-32 mm alternating	Narrow Sheet Flange (<30 mm)	Requires Welding and Polishing	Non-standard

FAQS/TECHNICAL SUPPORT

Frequently Asked Questions About Elevator Handrails

Measurement, assembly details, material quality and color options.

LiftKeys handrail systems are available in 5 different colors: Chrome, Smoked, Gold (Gold), Bronze and ESB Black. Pipes and brackets can be combined in the same color, as well as with contrasting contrasting designs.

No, absolutely no resources required. Thanks to the special O-ring and setskur screw system, the pipes are inserted by turning them into the elbows. This modular system both reduces assembly time to minutes and prevents the pipe from rotating or playing inside the cabinet.

Our standard pipe diameter is 30mm, our wall thickness is 1mm. In wall mounting, the right and left bracket spacing is a total of 140 mm (70 mm + 70 mm). You can find the pipe cutting measure without error by decreasing 140 mm from the cabinet width.

Yes, according to EN 81-70 standard, the handrail grip diameter should be between 30-45 mm and should be at least 35 mm exposed from the wall. LiftKeys takes full note of all inspections with 30mm diameter and 42mm flange distance.

Dedicated Customer Teams and Flexible Services

Our global presence ensures that your production timelines are managed smoothly, cost-effectively, and in compliance.